SWMM5 - Stormwater Management Model
SWMM 5, Watersheds, Water Quality,Hydrology, Hydraulics - Watersheds
Steps for Using EMC in SWMM 5
- Rating: No Rating
There are four steps to using EMC concentrations in your network:
1. Define your pollutant by adding a pollutant using the Data=>Quality=>Pollutant command:
2. Define the Land Use by using the Data=>Land Uses command or the Land Use Editor:
3. Define Buildup to be None by clicking on the None Tab:
4. Define the EMC Washoff concentration by clicking on the Washoff Tab:
1. Define your pollutant by adding a pollutant using the Data=>Quality=>Pollutant command:
2. Define the Land Use by using the Data=>Land Uses command or the Land Use Editor:
3. Define Buildup to be None by clicking on the None Tab:
4. Define the EMC Washoff concentration by clicking on the Washoff Tab:
About
Latest Activity
I am the supporter and user of SWMM5. Recently I built a small model using SWMM5 and found some weird outputs. The model build is attached herewith for your reference.
The model is built for run with time series of inflows and downstream water le...
Word Cloud
SiteStats
77 
5 
2 
33 
104 
159 
44 
2 Music TracksTranslate Tools
SWMM 5 Blog
© 2009 Created by Robert E Dickinson on Ning. Create Your Own Social Network
Badges | Report An Issue | SWMM 5 Blog | Privacy | Terms of Service
